Shoe GOO Adhesive Clear 1 oz Tube

In 1972 Shoe GOO was invented for "tennis toe" caused by dragging your shoe toe during service while playing tennis. It took two years of experiments with many gooey, gummy compounds before the perfect recipe was developed. This clear, rubbery adhesive was easily applied to shoes and hardens overnight restoring worn tennis shoes into "new" usable shoes again. The formula remains the same after all these years...not only do tennis players continue to use Shoe GOO, it has become very popular with skateboards and anyone not wanting to let go of those special shoes in the closet.

Use Shoe GOO:

• Rebuild your worn-out soles overnight
• Seal rubber boots, galoshes, and waders
• Coat and protect shoes to avoid premature wear
• Repair damaged heels
• Secure loose insoles
• Reinforce skate shoes
• Coat skateboards for extra traction

• Read completely before using. Surface should be clean, dry and free of dirt. For best results, roughen surface before use. Use Shoe GOO in a well-ventilated area.
• Puncture seal in neck of the tube using pointer cap. Product can be used between 50°F (10°C) and 90°F (32°C). Dry time decreases when used between 70°F (21°C) and 90°F (32°C).
  
• Always test a small area to ensure proper application technique and dry time.
• Apply Shoe GOO directly to the area to be bonded or repaired.
• Allow the repair to dry for 24 hours. Depending on the materials and the temperature, maximum strength may not be reached for 48 to 72 hours.
• To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
• Clean uncured adhesive with small amounts of acetone or naphtha. The adhesive will ball up and brush off. Cured material may be removed by cutting or scraping.